Brian LaMaster Rifle from the Bob Roughton Collection at the 18th Century Artisans Show

Number	13
Name	Winchester style Kentucky Rifle, Frederick Sheetz variation
Made by	Brian LaMaster
Barrel Length	42"
Caliber	.45
Value	$15,000
Purchased from	widow of John somebody (was custom made for John)
Private or Company
Misc	Super Deluxe Double-cavity patchbox All sterling silver mounted

Copy and photos supplied by Jim Chambers.

Artist at the 18th Century Artisans Show

Ken Gahagan

More of his work ca be found here

Frank Willis

More of Frank's work here

Jymm Hoffman, Blacksmith

More work ca be found here

Bill Shipman

More work here

Selinda Kenedy

Melinda's Facebook page here

A listing of other artist attending the 2019 18th Century Artisans Show can be found here.

Artist at the 18th Century Artisans Show

Shot Pouches by Eric Fleisher here

Pouch #186

8 ¾” wide x 6” high. 1 ½” wide gusset. Vegetable tanned cow hide leather and vegetable tanned goat hide trim. Hand sewn with linen thread. The cow hide adjustable strap is 1 ¼” wide with an iron buckle. 2 ¾” x 6 ½” internal pocket. Antiqued brass flap button. 

John Moll Sr, Lehigh Valley

Eric von Eschwege Klintlocks

More photos and information can be found here

George Schreyer, Sr.

Wrought Iron Flint Striker

Cabin Creek Muzzleloader with Brad and Shane Emig

More photos can be found here

18th Century Style Turn Screw by Brad

This 18th Century style turn screw is entirely hand made from original, unworked 18th Century Wrought Iron. It is constructed from one solid piece of iron and decorated with a suppressed ball turning, ogee moldings and hand engraved finial. It was finished off using the correct heat treating technology of the period to ensure proper function and longevity during use.   It measures 3″ in overall length.

 Early Philadelphia screw-tip horn with band, along with a small Lehigh style screw-tip priming horn

Art DeCamp

More work can be found here

North Carolina 4-Banded horn of Randolph County style

This circa 1790's to 1810 North Carolina horn is patterned after originals. The maple wood butt has a long button for strap attachment, with brass headed tack in the center of the button.  There is a contrasting wide horn band at the butt end of the horn and three contrasting horn bands are on the natural colored semi-translucent horn body.  The two-piece turned antler tip is pinned to the spout end of the horn.

This horn measures approximately 12" across, 2-1/2" diameter at the butt and could be carried either right or left side.  It will ride perfectly on a hunting bag.

"Buckskin Bow Case and Quiver"

Paintings and Prints by Andrew Knez, Jr.

More work here

Bob Harn Rifle from the Bob Roughton Collection at the 18th Century Artisans Show

Number	48
Name	Christian Springs
Made by	Robert Harn
Barrel Length	37"
Caliber	.54
Value	$7,500
Purchased from
Private or Company	Private
Misc	Elaborately carved Two-tailed wolf on stock Stepped wrist

Copy and photos supplied by Jim Chambers.

James Klein Rifle from the Bob Roughton Collection at the 18th Century Artisans Show

Number	81
Name	Copy of a Virginia Rifle
Made by	James Klein
Barrel Length	42"
Caliber	.45
Value	$4,500 (Dad raised from BB)
Purchased from
Private or Company	Private
Misc	Klein owned the original This version is enhanced a little, 4 petal flower finial, highly engraved patchbox, very pronounced carving on butt

Copy and photos supplied by Jim Chambers.